Herm Sprenger Bits

HERM SPRENGER BITS

www.sprenger.de

KK AND ULTRA MOUTHPIECES

These mouthpieces have evolved as a result of discoveries made about the horse's mouth:

1) The volume of the mouth is less than previously believed
2) The palate is narrower and flatter than originally thought

These factors mean there is less width on the tongue, and less space between the tongue and the roof of the mouth - thus it is more likely that the joint in a single-joint bit will hit the palate and disturb the horse.

The KK mouthpiece eliminates pressure on the palate and curves comfortably around the tongue and lower jaw.

The Ultra goes one step further with a center link which is slightly shorter to accommodate narrower jaws, and turned on an angle so that when there is tension on the reins, the link rests flat on the tongue without squeezing it. All Ultra bits are made with Aurigan - the first metal designed specifically for a horse's mouth. Ultra bits must be fitted with the small arrow pointing forward on the left side of the horse's mouth.

The RS Dynamique bits incorporate curved branches of the mouthpieces for further comfort for the horse.

SPRENGER MATERIALS

Bits and stirrups from Herm Sprenger are made in one of three metals - Stainless Steel, German Silver or Aurigan.

Stainless Steel is an alloy of iron, chrome and nickel. It is neutral - with no taste or smell, and is very strong.

German Silver is an alloy of copper, nickel, and zinc. As copper oxidizes, it gives off a distinctive smell and taste that horses like, encouraging them to chew on the bit and salivate, resulting in a more relaxed jaw. Copper is a very soft metal, so others must be added to give it the necessary strength.

Aurigan is a patented copper, zinc, and silicon alloy. This mix maximizes the oxidation of copper and gives it great strength. In addition, some horses have an allergic reaction to nickel, and Aurigan is nickel-free.

These are some of the Sprenger bits we normally stock; many others are available by special order.
Please note that there may be significant fluctuations in these prices - please call to confirm current pricing.

HS WH ULTRA SNAFFLE Developed by Lisa Wilcox and Ernst Hoyos, this double-jointed bit features a unique roller in the center section to stimulate the tongue, encouraging the horse to chew the bit and salivate, promoting acceptance of the bit and relaxation. Aurigan. 16mm - 4 3/4", 5 1/8", 5 1/2" 18mm - 4 3/4", 5 1/8", 5 1/2", 6" Also available in a 16mm bridoon 4 3/4", 5 1/8", 5 1/2"	$ 264.95
HS KK SNAFFLE with 2 3/4" RINGS 14mm thick - 5", 5 1/4", 5 3/4" 18mm thick in - 4 3/4", 5 1/8", 5 1/2", 6" 21mm thick in - 4 3/4", 5 1/8", 5 1/2", 6" Available in German Silver or Aurigan	18mm GS $ 209.95
HS KK BRIDOON w/ 2 1/4" RINGS 14mm thick - 5", 5 1/4", 5 3/4", 6 1/8"	German Silver or Aurigan GS $ 169.95
HS ULTRA SNAFFLE w/ 2 3/4" AURIGAN RINGS 14mm - 5", 5 1/4", 5 3/4" 16mm - 5", 5 1/4", 5 3/4" 18mm - 4 3/4", 5 1/8", 5 1/2"	16mm $ 219.95
HS ULTRA BRIDOON w/ 2 1/4" SS RINGS 14mm - 5", 5 1/4", 5 3/4", 6 1/8" German Silver or Aurigan	$ 209.95
HS KK CORRECTION BIT Encourages the horse to take a contact. 18mm - 5 1/8", 5 1/2" - Aurigan
HS KK ULTRA B-RING BIT Based on the Baucher bit; FEI approved. 16mm - 5", 5 1/4", 5 3/4" - Aurigan
HS ULTRA EGGBUTT 18mm - 5", 5 1/4", 5 3/4" Aurigan with Aurigan rings	$ 299.95
HS ULTRA DEE 15mm - 5", 5 1/4" Aurigan	$ 229.95
HS ULTRA FULLCHEEK 18mm - 4 3/4", 5 1/8 ", 5 1/2" Aurigan	$ 339.95
HS SHOWJUMPING BITS 'Conrad Universal' model (shown) 'Vienna' model ($ 294.00) 18 mm - 5 1/8", 5 1/2", 6" Aurigan	$ 395.00
HS ULTRA PELHAM 18mm - 4 3/4", 5 1/8", 5 1/2" Aurigan	$ 429.95
HS CONRAD CURB This anatomically-fitted bit avoids pressure on the palate while allowing room for the tongue. 21mm - 5", 5 1/4", 5 3/4" 13.5 cm total cheek length German Silver or Aurigan	$ 439.95
HS SPECIAL DRESSAGE A higher, wide port allows more tongue room. 18 mm - 5", 5 1/4", 5 3/4" 13 cm cheek length German Silver or Aurigan	$ 409.95
'HO' CURB FROM HERM SPRENGER The 16 mm Aurigan mouthpiece is angled and slanted for even tongue distribution, and the shorter 5 cm stainless steel cheeks are less severe for more sensitive horses. 5", 5 1/4", 5 3/4"	$ 419.95

All prices are in Canadian Funds

Back to Bits Department

[Specials] [What's New] [Q&A] [Around the Shop] [Home]

info@sandridge.ca